Green and inventive fluorescence approach for levodropropizine determination in human plasma.

A green, rapid and sensitive fluorimetric method to quantify levodropropizine (LVP) in human plasma was exploited for the first time. The proposed method adopts LVP's intrinsic fluorescence in distilled water at a detecting emission of 345 nm following excitation at 240 nm. LVP displayed linearity across concentrations ranging from 50 to 1000 ng mL-1, with a detection limit of 0.77 ng mL-1 and a quantification limit of 2.33 ng mL-1. Thorough validation confirmed its reliability, successfully determining LVP in tablets with an average recovery of 98.64 ± 1.07 %. Furthermore, the method's applicability extended to estimate the studied drug in spiked human plasma with excellent obtained percentage recoveries (98.68 ± 1.28-100.14 ± 1.23).

Improving fluorescence emission of cyproheptadine by hindering its intramolecular photoinduced electron transfer (PET): Application to content uniformity testing and human plasma.

The ability to determine antihistaminic drugs in biological matrices is critical for the medication adherence assessment. Among these antihistaminic medications, cyproheptadine (CPD); that is acting as a potent first-generation antihistaminic drug that has been extensively prescribed for allergic patients. Most of the established approaches for CPD detection are not appropriate for this purpose owing to their weak sensitivity, lack of rapidity, and complicated experimental procedures. Herein, we present a very fast, highly sensitive, and reproducible approach for the detection of CPD in its pure form, tablet formulation, and spiked human plasma. The photoluminescence approach depends on hindering the intramolecular photoinduced electron transfer (PET) effect of the lone pair of the N-atom present on the piperidine ring of CPD by making the surrounding medium acidic using 1.0 M acetic acid. Based on blocking PET, the target CPD drug has been sensitively detected from 5.0 to 500 ng mL-1 with a very low detection and quantitation limit of 7.01 and 21.25 ng mL-1, respectively. Moreover, the established approach was used for checking the tablet content uniformity testing for each tablet and spiked human plasma, and noteworthy, the matrices interference was insignificant.

Simultaneous Determination of Ceftazidime in Three Different Pharmaceutical Preparations Combined with Either Tazobactam, Tobramycin or Sulbactam by HPTLC-Spectrodensitometric Method.

A new, simple hight performance thin layer chromatography (HPTLC)-Spectrodensitometric strategy was created and approved for the synchronous estimation of four antibacterial specialists: ceftazidime (CEF), tazobactam (TAZ), tobramycin (TOB) and sulbactam (SUL). The four compounds were separated on TLC aluminum plates covered with silica gel 60 F254, using chloroform-acetonitrile-methanol-ammonia (4:1:0.5:0.15, v/v/v/v) as a mobile phase at 254 nm. Linear correlation was obeyed over the concentration ranges of 12.0-72.0, 2.0-12.0, 3.0-18.0 and 10.0-50.0 µg mL-1 for CEF, TAZ, TOB and SUL, respectively. The proposed approach is efficient, repeatable and convenient as a flexible method for the quality control of diverse combinations of these pharmaceuticals in various pharmaceutical preparations, with high percent recoveries that are highly consistent with labeled data. When the findings of the proposed technique were compared to those of the comparison methods, there were no critical contrasts in terms of precision and accuracy.

Feasible spectrofluorimetric approach for the ultrasensitive determination of lomefloxacin based on synergistic effects of micellization and metal complexation.

The purpose of the present work was to establish a fast and convenient strategy for lomefloxacin analysis using a fluorimetric approach. The methodology was based on the complex formation of the drug with aluminum ion to give a product having high fluorescence. Adding sodium dodecyl sulfate led to further boosting the intensity of fluorescence which was recorded at 429 nm after excitation at 332 nm. The relationship of emission intensity with lomefloxacin concentration was linear at 10-130 ng mL-1 with a correlation coefficient of 0.9996. The quantitation limit was 11.4 ng mL-1 and detection limit was 3.8 ng mL-1. The reaction conditions were carefully studied which included the pH, buffer type, its concentration, the type and concentration of surfactant and the diluting solvent. The method was utilized to quantify the aforementioned drug in tablet formulations and in real human plasma with high accuracy and reliability.

New validated spectrofluorimetric protocol for colistin assay through condensation with 2,2-dihydroxyindan-1,3-dione: application to content uniformity testing.

A new, cost-effective and sensitive spectroscopic assay for the quantification of Colistin Sulfate (CS) and its prodrug colistimethate sodium (CMS) has been developed and validated. The validated technique depends on the condensation of the studied drug with 2,2-dihydroxyindan-1,3-dione (ninhydrin) and phenylacetaldehyde using Teorell and Stenhagen buffer (pH = 6) to yield a fluorescent product that is estimated at emission wavelength (λ em = 474 nm) after excitation wavelength (λ ex = 390 nm). The reaction's affecting factors were carefully studied and adjusted accurately. Over the following range (0.4-2.4 µg mL-1), the produced calibration plot looked rectilinear, and the estimated limits of detection and quantification (LOD and LOQ) were 0.051 & 0.154 µg mL-1 respectively. The recommended approach was utilized to evaluate market products containing the investigated drug. Moreover, content uniformity testing was employed as a new procedure not found in the previously reported fluorimetric technique.

Micelle-enhanced spectrofluorimetric method for the rapid determination of bronchodilator terbutaline and its prodrug bambuterol: application for content uniformity test.

A novel, simple and sensitive spectrofluorimetric approach for determination of terbutaline sulphate (TER) and its prodrug bambuterol (BAM) in their pure and pharmaceutical dosage forms was developed. The suggested approach depends on enhancing the native fluorescence of either TER or BAM at 315 and 297.2 nm after excitation at 277 and 259 nm, respectively, using sodium dodecyl sulphate (SDS) as a micellar medium. In the presence of 0.7% w/v SDS, ~1.38-fold and 1.18-fold enhancement is achieved in the relative fluorescence intensity (RFI) of TER and BAM, respectively. The fluorescence-concentration curves were rectilinear over the concentration range 0.8-16 µg ml-1 , with detection limits (LOD) of 0.252 and 0.26 (µg ml-1 ), quantitation limits (LOQ) of 0.76 and 0.79 (µg ml-1 ), determination coefficients (r2) of 0.9981, and slopes of 45.92 and 10.44 for TER and BAM, respectively. The suggested approach was validated in accordance with International Council for Harmonisation criteria and was effectively applied in the analysis of the studied drugs in their commercial tablets. The high sensitivity of the proposed approach allows its application in evaluating the content uniformity testing of the studied drugs in their tablets through using the official United States Pharmacopeia criteria. Statistical analogies of the findings with that of the reported methods showed really good harmony and indicated no major differences in precision and accuracy.

Salvage parenteral antibiotics for multidrug-resistant (MDR) Gram-negative bacteria; a fluorescamine-based technique for ultrasensitive spectrofluorimetric measurement of Polymyxins; human plasma application.

Polymyxins (PMS), namely Colistin (CS) and polymyxin B (poly B), are antimicrobial drugs that have been recently used to treat multiresistant Gram-negative bacteria infections and their resurgence, owing to a lack of new antibiotics. A speedy, simple, and ultrasensitive spectrofluorimetric screening of PMS in pharmaceutical formulations and biological fluids was urgently required from this point forwards. A reaction between fluorescamine and the aliphatic amino moiety found in both drugs was performed in a slightly alkaline borate buffer (pH 8.5) resulted in highly fluorescent products measured at λem 460 (after λex 390.5 nm). Linear calibration curves were constructed over the concentration range 70-1800 ng ml-1 and 100 to 1400 ng ml-1 , with slope values of 0.273 and 0.286, correlation coefficients of 0.9998 and 0.9997, and determination coefficient of 0.9997 and 0.9994 for poly B and CS, respectively. The ultrasensitivity of the proposed method was demonstrated by the very low limit of quantification values of 67.56 ng ml-1 and 94.89 ng ml-1 for poly B and CS, respectively. The cited drugs were successfully determined in their intravenous market preparations by the prescribed method. Moreover, due to the high sensitivity, the suggested method was used to assay the investigated drugs in biological fluids.

Micellar Thin Layer Chromatography and Computer-Aided Analysis of Empagliflozin, Linagliptin and Metformin HCl Ternary Mixture.

The present work was performed in order to study the mechanism of micellar thin layer chromatography (MTLC) and to develop a new simple and sensitive simultaneous MTLC method for separation of empagliflozin, Linagliptin and metformin hydrochloride ternary mixture. The study was done using three different surfactants; sodium dodecyl sulphate (SDS), benzalkonium chloride (BAC) and polysorbate 80 (tween 80). Chromatographic procedure was performed using micellar mobile phase that composed of aqueous solution of each surfactant and methanol (6: 4 v/v) and micellar TLC determination at λmax 237 nm. Separation using SDS (anionic surfactant) and BAC (cationic surfactant) depends on ionization potential (AMI-IP), partition coefficient (logP (o/w)) and hydrogen bond donor atoms (a-don), whereas separation using tween 80 depends mainly on the lipophilicity (RM0), solvation energy (E-sol) and Van der Waals energy (E-vdw). Quantitative structure-retention relationships study was carried out, modeled, evaluated and validated using molecular operating environment software.

Selective Spectrofluorimetric Protocol for Determination of Commonly Used Gram-negative Bactericidal Drug in Combined Pharmaceutical Dosage Forms and Human Plasma.

Gram-negative bacteria cause infections such as skin infection, meningitis, and pneumonia in human being. Gram-negative bacteria are highly resistant to most availaible bactericidal drugs. One of the most commonly used Gram-negative bactericidal drug is Polymyxin B sulfate (PMS). In addition, it is used in cases of highly resistant Gram-negative bacterial infections. The widespread of PMS necessitate the development of an exceedingly sensitive and selective fluorimetric assay for its determination in pure form, different pharmaceutical dosage forms, and human plasma. The presented method is used to determine PMS in their dosage form (vials) and combined pharmaceutical formulations (skin and eye ointments) with a high degree of accuracy and selectivity. The described procedure relies on the structure of a derivative of a high degree of fluorescence called dihydropyridine, via the condensation of the amino moiety of PMS with two equivalents of acetylacetone in the presence of formaldehyde and Teorell buffer (pH = 3). The fluorescent product was measured at 471 nm (λex = 402 nm). The linearity ranged from 100-3000 ng mL-1 of PMS with an excellent r2 of 0.9998. LOD and LOQ were 27.16 ng mL-1 and 82.30 ng mL-1, respectively. Owing to the developed method's high selectivity, it was successfully utilized for assay of PMS, in the ointment, in the presence of oxytetracycline as an active ingredient. Furthermore, the procedure applied for the estimation of parenteral PMS in human plasma with very good mean recovery 97.42 ± 1.46.

Benzofurazan -based fluorophore for the spectrofluorimetric determination of 6-Aminocaproic acid: Application to spiked human plasma and urine.

6-Aminocaproic acid is one of the most widely used antihemorrhagic and antifibrinolytic agent, therefore, it is essential to create a novel, sensitive, low cost and straightforward spectrofluorimetric method for its determination. The nucleophilic substitution interaction between the primary amine of 6-aminocaproic acid with 4-chloro-7-nitro benzofurazan (NBD-Cl) generated a yellow product. The reaction proceeded in borate buffer (pH 9) and its fluorescence has been measured at 525 nm after excitation at 472 nm. All of the parameters that have impact on the performance of the developed method were investigated and optimized. The range of linearity was 0.1-0.7 µg/mL while, the quantitation limit was down to 0.101 µg/mL and limit of detection was 0.033 µg/mL. This approach was effectively employed to evaluate the content of 6-aminocaproic acid in laboratory prepared dosage form with average percentage recovery of 100.19 ± 0.72% without any interference from basic excipients. Moreover, the proposed method was extended to determine 6-aminocaproic acid in spiked human plasma and urine.

Sensitivity improvement for spectrofluorimetric determination of commonly used antifungal drug 'nystatin': application for oral suspension.

In this paper, two simple, rapid and highly sensitive spectrofluorimetric methods were developed and validated for nystatin determination in its pure form and pharmaceutical dosage form (oral suspension). The first method was based on measuring the nystatin native fluorescence after dilution with isopropyl alcohol at 407 nm (excitation 303 nm). The fluoresence intensity was linearly dependant on the nystatin concentration within the specified range 50-500 ng ml-1 . The second was based on micellar enhancement of nystatin fluorescence using sodium dodecyl sulphate (SDS). In the presence of 2% w/v SDS, an ~1.9-fold enhancement could be achieved in the relative fluorescence intensity of nystatin. The linear range for the second method was 20-100 ng ml-1 . The limits of quantification and detection were found to be 43.23 ng ml-1 and 14.27 ng ml-1 (Method I), 6.08 ng ml-1 and 2.0 ng ml-1 (Method II). According to percentage recoveries and relative standard deviations (RSDs) obtained, the proposed methods were precise (RSDs were less than 2%), reproducible, and accurate and could be successfully applied for quantitative estimation of nystatin in its dosage form. The statistical results of this method were compared with that of the reported method and showed excellent agreement with respect to accuracy and precision.

A novel spectrofluorimetric method for determination of lomefloxacin adopting on zinc(II) chelation strategy: Application in human plasma.

A new sensitive and instantaneous spectrofluorimetric method for efficient determination of lomefloxacin (LMX) in its pure, dosage form and human plasma was designed. The developed method depends on formation of a metal-chelation compound of LMX as a ligand with zinc(II) in a buffer of acetate (pH 5.5). The following parameters; type of metal, concentration of metal, pH, type of buffer and diluting solvent were optimized. After carefully investigation; 0.2 mM zinc, 2.0 ml acetate buffer (pH 5.5) and water as diluting solvent were set as optimum reaction conditions. Under these conditions, a large increase in the intensity of the fluorescence of LMX was attained at 450 after excitation at 284 nm. The limits of detection and quantification were 5.8 and 1.9 ng ml-1 , respectively, with linearity range of 10.0 to 500.0 ng ml-1 . The binding mode of LMX and zinc(II) ion (Zn2+ ) was found to be 2:1, respectively, and confirmed by Job's plot method. Furthermore, it extended to the analysis of LMX in the spiked plasma of humans with percentage recovery (98.70 ± 0.97 to 100.30 ± 1.69%, n = 3).

An innovational validated spectrofluorimetric technique for determination of 6-Aminocaproic acid in pure form and its tablet: Application to spiked human plasma and urine.

An innovative and sensitive spectrofluorimetric method has been developed for determination of 6-aminocaproic acid (ACA) in its pure form and its laboratory prepared tablets. The aim of this method is the reaction of ethyl acetoacetate and formaldehyde with the primary amino group presented in ACA as aimed in the Hantzsch reaction, this reaction resulted in formation of a yellow fluorescent dihydropyridine derivative that can be easily detected spectrofluorimetrically at 438 nm (excitation at 358 nm). At the optimum conditions of the reaction, the linear range was found to be (0.7-3.5 µg\mL) with limit of detection is 0.231 µg\mL and limit of quantitation is 0.700 µg\mL. The proposed method used for detection of ACA laboratory prepared tablets with average percentage 100.721 ±â€¯0.701% without any interference from any excipients. This method used for in vitro determination of ACA in spiked human plasma with a percent mean recovery 99.874 ±â€¯1.416%. In addition, the developed method used for determination of ACA in spiked human urine with percent mean recovery 100.314 ±â€¯1.793%.

Simple TLC-spectrodensitometric method for studying lipophilicity and quantitative analysis of hypoglycemic drugs in their binary mixture.

A selective and simple salting-out-assisted thin-layer chromatographic methodology was developed for the simultaneous determination of two oral hypoglycemic drugs, dapagliflozin (DAPA) and metformin (MET) in their pure forms, tablets and spiked human plasma samples. Silica gel 60 F254 plates were used in the separation of the two drugs using a mobile phase consisting of 0.5 m (NH4 )2 SO4 and methanol (3:7, v/v). The plates were scanned in the reflectance mode at λmax = 237 nm. The obtained retardation factor (Rf ) values for DAPA and MET were 0.77 ± 0.02 and 0.25 ± 0.02, respectively. The thin-layer chromatography method was validated according to International Conference on Harmonization guidelines. The peak areas were linearly increased with the increases in concentrations of 45-1,000 and 50-1,500 ng/band for DAPA and MET, respectively. Moreover, the method was applied to estimate the molecular lipophilicity parameters of DAPA and MET via retention data. The suggested method was efficiently utilized for the analysis of DAPA and MET in pharmaceutical tablets and plasma samples with recoveries 98.4-100.4 and RSDs in the ranges of 1.4-2.6 and 2.2-3.0% for DAPA and MET, respectively.

Design and strategy for spectrofluorimetric determination of tranexamic acid in its authentic form and pharmaceutical preparations: application to spiked human plasma.

A creative, very sensitive and noncomplicated spectrofluorimetric technique was established and further validated to determine tranexamic acid in both its authentic form and its pharmaceutical preparation dosage forms. In the introduced technique, a reaction was found between the aliphatic primary amino group of tranexamic acid and ninhydrin/phenylacetaldehyde reagents in the presence of Torell and Steinhagen buffer pH 7.0, which led to the production of a highly fluorescent product; fluorescence intensity was measured at 475 nm after excitation at 391 nm. A calibration curve was drawn with a linear range of 0.3-2 µg/ml. Limit of detection and limit of quantification values were 0.051 and 0.155 µg/ml respectively. The introduced technique was validated based on the International Council for Harmonisation guidelines and agreed for determination of tranexamic acid in its pharmaceutical formulation. Finally, this simple method was also applied for determination of tranexamic acid in spiked human plasma.

The first spectrofluorimetric approach for quantification of colistin sulfate and its prodrug colistimethate sodium in pharmaceutical dosage form and human plasma.

A new, accurate, nonextractive, and sensitive fluorimetric approach was proposed and validated for the first time estimation of colistin sulfate and its inactive prodrug colistimethate sodium in its bulk form, pharmaceutical formulations, and human plasma. The approach relied on condensation between acetylacetone/formaldehyde and the primary amino moiety of nonfluorescent colistin in Teorell and Stenhagen buffer (pH 2.8) by the Hantzsch reaction to form a highly fluorescent dihydropyridine derivative. The fluorescent product was measured at 460 nm (λex  = 402 nm). A plot of relative fluorescence intensity (RFI) versus concentration was rectilinear over the range 200-4000 ng ml-1 with excellent correlation (r) and determination (r2 ) coefficients of 0.9999 and 0.9998, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) were 40.91 and 123.99 ng ml-1 , respectively. The present procedure was useful for determination of colistin sulfate either in powder form for suspension or in its parenteral prodrug colistimethate sodium in vial formulation. The investigated approach was applied for in vitro quantification of this drug in spiked human plasma, with a per cent mean recovery of 98.24 ± 1.34. The proposed method is reliable, selective, and does not require tedious sample pretreatment steps, expensive instrumentation, or harmful reagents, all of which make it ideally suited for use in quality control laboratories.

Utilization of a complex arrangement approach for spectroscopic examination with Eosin Y of various cephalosporins in their pure or pharmaceutical dosage forms, and in human plasma.

Approved, basic, effective and successful spectroscopic strategies (spectrophotometric and spectrofluorimetric) were created to measure seven cephalosporins: cefpiramide (I), cefuroxime (II), cefoxitin (III), ceftazidime (IV), cefpirome (V), ceftobiprole (VI), and ceftriaxone (VII). These strategies used a two-fold complex arrangement response for the drug amino groups with Eosin Y (EY). The examined drugs were determined spectrophotometrically at 542-550 nm in acetic acid derivative buffer. The examined drugs were determined spectrofluorimetrically by measuring their quenching effect on EY local fluorescence at 545 nm after excitation at 305 nm. The absorbance-intensity plots were rectilinear over the ranges 20-100, 10-130, 20-220, 30-230, 10-210, 20-180 and 10-130 µg ml-1 for I, II, III, IV, V, VI, and VII samples, respectively. The fluorescence-intensity plots were rectilinear over the ranges 0.5-1.5, 0.1-0.9, 0.3-1.5, 0.5-2.5, 0.1-0.9, 0.5-2.5 and 0.1-1.0 µg ml-1 for I, II, III, IV, V, VI, and VII samples, respectively. The recommended materials were certified as adhering to International Council for Harmonisation (ICH) guidelines and were used to examine the tested drugs in different dosage forms and in human plasma tests. The approved materials matched the reference materials.

Innovative Thin-Layer Chromatography/Fluorescence Detection Approach for Sensitive and Specific Determination of Ledipasvir in Rats' Feces and Pharmaceutical Dosage Form.

An innovative thin-layer chromatography method coupled with the fluorescence detection was developed for a specific estimation of ledipasvir. The separation was achieved on plates of silica gel 60 F254 using ethylacetate: hexane: acetonitrile: triethylamine; (6: 3.5: 1.5: 0.5, $\mathrm{v}/\mathrm{v}/\mathrm{v}/\mathrm{v}$) as a mobile phase system. The method involved the exposure of the developed thin-layer chromatography plate of ledipasvir to strong ultraviolet irradiation, resulting in a great enhancement in the fluorescence properties of ledipasvir. The irradiated plates were scanned after the excitation at 315 $\mathrm{nm}$. The method provided a sufficient separation of ledipasvir from sofosbuvir with ${R}_F$values of 0.28 and 0.36 for ledipasvir and sofosbuvir, respectively. The developed procedures were validated based on guidelines from the International Conference on Harmonization and Food and Drug Administration guidelines. The calibration curve was linear over the range of 5-50 $\mathrm{ng}/\mathrm{band}$. The excellent analytical features of the proposed method allow to the specific determination of ledipasvir in pharmaceutical tablets without interference from sofosbuvir or excipients. As the main elimination route for ledipasvir is via the fecal excretion (86%), the method was applied for the estimation of ledipasvir in fecal specimens with adequate recovery. In addition, the proposed method was applied for testing the content uniformity of ledipasvir in the pharmaceutical tablets.

Green spectrofluorimetric determination of salmeterol xinafoate in its pure forms, medicinal commercial formula, and human plasma: Application for stability studies.

A natural, accurate, extremely rapid, and precise spectrofluorometric method has been developed and validated for determination of salmeterol (SAL) xinafoate in its medicinal commercial form and spiked human plasma. The native SAL fluorescence has been measured at 415 nm (after 340 nm as excitation) in distilled water. Different factors affecting the native fluorescence consistency of SAL were surveyed and optimized. The suggested procedure was capable of SAL determination over concentrations ranging 200-2000 ng.mL-1 with excellent correlation coefficient of 0.9995. The limits of detection and quantification were estimated as 44.44 ng mL-1 and 134.66 ng mL-1 , respectively. The method has good accuracy and precision. The green spectrofluorometric method was used for determination of SAL in its commercial preparations and the results were in accordance with other reported methods regarding accuracy and precision. Moreover, the proposed procedure was enforced for stability indicating assay of SAL and for SAL determination in spiked human plasma. Nearly no cost, high sensitivity, and wide application make the proposed method ideally suited for analysis of SAL in quality control laboratories.

A Glassy Carbon Electrode for the Determination of Linagliptin, an Antidiabetic Drug in Pure Form, Tablets and Some Biological Fluids by Adsorptive Stripping Voltammetry.

AIM: The present work provides a fast, simple, accurate, and inexpensive analytical method for the determination of Linagliptin (anti-diabetic drug). METHODS: The analysis was performed using a square wave adsorptive anodic stripping voltammetric technique (SWAASV) and glassy carbon electrode (GCE) as a working electrode. The experimental and instrumental parameters were studied and discussed to ensure the validity of the method. RESULTS: The method has a very good linearity (R2 = 0.9984), wide concentration range (0.189 - 2.268 µg mL-1), low detection limit of 0.052 µg mL-1 and low quantitation limit of 0.172 µg mL-1. CONCLUSION: Linagliptin was identified successfully using the proposed method in pharmaceutical formulations, spiked human urine and plasma with 99.67, 91.96, and 92.78% recovery, respectively, and the results obtained were compared with other reported methods.